Loading... Please wait...

Pop Up and Tilt Pedal Board in ATA Case - Unique! - 28 Inch

Step 3 Insert back board against still brackets and inside corner of case.
  • Step 3 Insert back board against still brackets and inside corner of case.
  • Image 2
  • Rear View, back board also doubles as a facade for any wiring under pedal board.
  • Flat Set Up
  • Image 5
  • Tilt Set Up
  • Quick Set up Step 1 Stilt Brackets, Pedal board and back board come out all the way.
  • Step 2 Lay pedal board on front ballister.
  • Image 9
  • This inovative new ATA pedal board case is both practical and very useful. It is simple to setup and can also be used as a standard pedal board case if you don't use the "Pop Up & Tilt" option. It comes completely out of the case without fasteners. The case itself is constructed of standard 1/4" plywood laminated to a heavy gauge nubtex vinyl laminate. The catches are recessed and the handle is a spring loaded surface mounted handle with a rubber grip. All aluminum extrusion is used to assemble the case and the entire interior is carpet lined and velcro friendly.
Price:
$149.00
SKU:
610373660103
Brand:
Road Cases USA
Condition:
New
Weight:
20.00 LBS
Rating:
( 1 product review )
Availability:
Usually Ships in 5-10 business dasy
Shipping:
Free Shipping
Quantity:

Product Details & More

Product Description

Pop Up and Tilt Pedal Board in ATA Case 28 Inch

Available In 3 Sizes

 Inside Dimensions:

24" x 12" x 4 1/4" high above the pedal board - 1 1/4" below the pedal board

28" x 14" x 4 1/4" high above the pedal board - 1 1/4" below the pedal board

32" x 16" x 4 1/4" high above the pedal board - 1 1/4" below the pedal board

 pop up pedal board case

  • 1/4" Plywood Construction
  • Recessed Catches
  • Surface Spring Handle
  • 1 1/4" Space Under Pedal Board - 4 1/4" Above
  • Approx 2" High In Front
  • Approx 7" High
  • Hold Down Blocks Pedal Board
  • Carpet Lined Interior
  • Made in The USA
This innovative new ATA pedal board case is both practical and very useful. It is simple to setup and can also be used as a standard pedal board case if you don't use the "Pop Up & Tilt" option. It comes completely out of the case without fasteners. The case itself is constructed of standard 1/4" plywood laminated to a heavy gauge Nubtex vinyl laminate. The catches are recessed and the handle is a spring loaded surface mounted handle with a rubber grip. All aluminum extrusion is used to assemble the case and the entire interior is carpet lined and Velcro friendly.
 
001addy.jpg

 

Find Similar Products by Tag

Tilting Effect Pedal Case  Tilting Pedal Board Case  

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Pretty nice

    Posted by Fabian on 2nd Feb 2012

    I got my pedalboard and it looked very nice. After I set it up it looks even nicer. I like the construction and sturdiness. I wish the front panel was attached to the board with a hinged connector rather than a loose board that you need to prop. But, that is a small detail that does not detract from the board itself. The other wish I have is an angle selector for the board itself. The way it is set up the angle is a little steep. It would have been nice to have a way to make the angle smaller. Sure, I can cut the support board to the angle I want. Again, not a deal breaker by any stretched of the imagination.

    If I had to buy it again, I would. Also, I already recommended it to a few friends.

ROADCASE ROADIE NEWS