Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Road Cases USA

Fold-Up' Photo Booth ATA Case - 'Do It Yourself' Cutouts - Black


Fold-Up' Photo Booth ATA Case - 'Do It Yourself' Cutouts - Black

70.00 LBS
Usually Ships in 5-10 Business Days
Free Shipping

Product Description

'Fold-Up' Photo Booth 3/8" ATA Case

'Do It Yourself' Cutouts

 * This case does not have any cutouts or trap doors. You have to customize this case yourself to fit your specific equipment. Dual Rear trap doors option is available for rear access. (see photo below and also in thumbnails above)


Dual Rear Trap Doors Option

2 - 14" x 20" Hinged Trap Doors


  • 3/8" Plywood ATA Construction (1/4" False Front Panels)
  • Hard PVC Laminate
  • 6 Recessed Handles
  • 2 Large Recessed Catches
  • Large Flat Steel Corners
  • Dolly Wheel Kit Included
  • 2 Large Hinges To Connect Case Halves Together (Removable)
  • Optional Dual Rear Trap Doors 14" x 20" For Rear Access
  • Outside Dimensions When Closed Approx 23" W x 28" D x 37" High
  • Inside Dimensions Of Bottom Half Approx 35" x 22" x 15 1/2" Deep
  • Inside Dimensions Of Top Half Approx 35" x 22" x 11 1/2" Deep
  • Case Stands Approx 73 1/2" High When Setup
  • Made In The USA 

This 'Fold-Up' photo booth ATA case makes customizing your own photo booth fun and easy! Simply cut the holes and trap doors into the 3/8" plywood case shells and 1/4" false front panels by drilling a hole in one corner of the cutout then using a hand held jigsaw to finish the square or rectangular cutouts. Case is complete with all the finest hardware on the market today. Simply unlatch the two latches and 'hinge up' the front half of the case all the way to sit on top. A very unique, easy, compact design! Case will be shipped in two boxes with dolly wheels inside and the two connecting hinges unbolted for attaching both halves together. Full pictorial instructions make the partial assembly a snap!

*Note - the 8 wood ballists that hold front panels on. (4 in each half of case) are only fastened with a small amount of hot glue so that they can easily be removed. This is neccessary in case you want to move the front panels back a bit so that after you make your cutouts in the front panels any trim, or slight projection of any item installed on front panels do not hit each other when trying to close the case together again. After all your cutouts and customization is complete, 8 ballists can be reattached with either hot glue or wood screws or both. 


Find Similar Products by Tag

Product Reviews

Find Similar Products by Category